Search results

Looked at the parts diagrams again and under the tractor, only found two on the axle one on each side. None on the hubs and none on the pivot thanks

I'll look again, thanks

I could only find two in the front axles..are there more?

Thanks

Could you post or send me the link to the product? thanks

Anyone using any aftermarket blades on their mower ? The ones I looked at seem to be not as thick as OEM Think the BB OEM part is 038-0001-00 thanks

I adjusted the tensioner that the cable is very tight ..still lots of slack in belt and the arm is moving free I may adjust the tensioner back a little to prevent the cable from breaking

How bad of a job is replacing the drive belt? I was wanting replace both the deck and drive belt and any pulleys or spindles that need it at the end of mowing season...Its a 2013 model with 240 hours..Like to start the next year mowing season without any issues if possible.

44" deck, I noticed the blade slow or stop when going over grass rows or anything over three inches tall. With engine stopped and blades engaged looks like there 5" of slack in the belt. Is it possible that the belt has stretched that much?...Belt has never jumped off or anything but trying to...

Thanks for the info

This is a Outlaw extreme 54" deck How in the heck are you suppose to add grease to this grease zerk ? The zerk is way to close to another pulley to get grease gun on. Possible to remove this and add 90 degree one Anyone happen to know size zerk badboy uses thanks

Sorry for the posting error

I see Castrol stopped making the 50w dino oil, anyone using the 20w-50 ? I don't think there would be any issues using it??

Thanks

This is on Outlaw 54" can not find any info in the manual

On one of the fuel tanks the 3/16 vinyl hose that I guess recovers vapor and returns it to the Carb is rotted and needs replace. Can I just plug the valve on tank and on carb? Replacing that line would be quite the job, runs through part of the frame..ect

What the CCA needed this mower? Does anyone have a link to a cheap replacement?

yes brake holds I tried to adjust these to make them shorter..but there wasn't any adjustment left

While in neutral (arms extended out) the mower will ever so slowly move forwards. I did replace the pump idler spring when it broke.

Can you pump the oil through the fill plug in order to put fresh clean oil in it? This is on a non-serviceable one. Or maybe the over flow plug?

I was as the dealer other day and notice that all the mowers will blow out some pretty heavy smoke on start up. Maybe its the break in oil or the way the choke works on their engines. They soon stopped right after start up, so I guess its okay.

What do you guys use when removing the rear wheels or wanting to get underneath the engine department.

I went in the local DC dealer and looked at the Magnum. I sales person ask how much I would be mowing. I said about 1 acre maybe 1.5, he said don't expect any warranty work done when I tear up the Magnum. I told the guy I been mowing it for 10 years or longer with a 800.00 Murray. Didn't...

Hello to all. I been looking around local for a ZTR for a while and been reading up here on this site and others. I looked at Hustler, JD, Exmart, and Badboy. I ran across a 2008 badboy pup 23hp 54" cut for $3000.00 with 287 hours. The mower looks in pretty good shape and well taken care of. I...