Craftsman lt4000

Blades and belts DO NOT MOVE when your trying to start it unless you unhooked the blade safety . If it is an electric PTO there isn't enough power to start the motor , turn the PTO ...
 
well...voila! ...make sure you start with good fuel in the tank....i like to install a shutoff valve before carb work...so gas spillage doesnt get out of hand....first..check the fuel shut off solenoid....hold it as you turn the ignition on and off....you should feel a thump inside it....see picture
 

Attachments

  • IMG_0850[1].jpg
    IMG_0850[1].jpg
    104.4 KB · Views: 13
i would get a rebuild kit and do the carb.....get 5 cans of carb spray cleaner and clean the outside first before you take it off
 
Back
Top