Search results

The governor holds the throttle plate wide open i thought and will pull it closed as motor runs?? Govenor adjustment is a basic setting and pretty hard to get it wrong Only one way to do it! If its wrong nothing moves?? Anyway I have adjusted the governor many times to see if it changes anything...

Plate is fine Could it Be sucking air someplace?? Would that cause it to run WOT?

Ok here is where I'm at! No change! Opened engine and Governor is fine everything inside good so new gasket fixed small leak so I'm in better shape there! I had a new carb and put it on adjusted governor and no change engine racing so I'm still stumped or doing something wrong all linkages the...

Thanks Auto Doc's I have New Governor gear crankcase gasket and oil seal ready to go!

Got it i found the fastener Thanks

Yes all springs in place and correct i have looked at every picture on net and manuals looked at every video I can find and tried everything that's why I'm still thinking its the governor?

Throttle plate functions and good! But dose not move with Throttle control Will only stay at WOT should the Throttle plate open and close with Throttle control when engine off? Or is it controlled by the govenor? Meaning say on my OHV engines the Throttle control opens and closes the throttle...

Thank you

Do you still have access to repair manuals for 40 through 42 series Thanks

Yup had the knife out I keep all knifes away from my wife! Thanks I'm taking a step back and can use some help! The reason I'm took motor out is because I belive the governor arm is shot and small gasket leak! I have adjusted and set governor arm every which way and the engine just goes wide...

I have to put a new sump gasket and governor in my 422707-121401 Briggs Engine is off machine and on bench 6 bolts removed from sump! This thing is on tight rubber mallet not working don't want to damage anything any ideas Afraid to keep beating on it!

Do you by chance have repair manual for 422707-121401 Briggs??? Thanks

All tests have determined governor gear But have to replace crankcase seal anyway! Thanks Auto Doc If you have a repair manual I would like to reset it@ 422707 1214 01

Thanks I know how to set Governor I'm asking about replacing Governor Need to Crack open and install new one! Meaning new Governor Gear

I have to put a new Governor in my BRIGGS 422707-121401 opposed twin! Is the procedure the same as on a OHV Briggs??? Thanks Sorry multiple posts

I have to put a new Governor in my BRIGGS 422707-121401 opposed twin! Is the procedure the same as on a OHV Briggs??? Thanks

I have to put a new Governor in my BRIGGS 422707-121401 opposed twin! Is the procedure the same as on a OHV Briggs??? Thanks

Thank You

Thanks so much! Exactly what I needed and more

Have an older Ariens rider with a Tecumseh OHV 15 model #204009 Can't find valve settings anywhere for this motor And do you set the same as a Briggs?? Thanks