Search results

Looking for a used mower deck for a 53AA5B6L710 Cub Cadet, Part number 01008481 or 02000619. The old one is rusted too bad for repairs and customer don't want the cost of a new deck.

Why am I getting 502 Bad Gateway on this forum? Am I the only person getting this?

I now have a Cub Cadet 2206 with a mower attachment that I really don't have a use for. So I offered it to my grand daughter and her husband. They can also use a snowblower on this tractor. Has anybody ever install a snowblower on this model tractor and if so how dose it work?

I have mower decks that come into my shop with either broken or rusted off brackets. I have a stick welder but find its just too hot to weld the thin metal that the decks are made of. I find that my best luck is to braze them back on with a gas torch. I have been looking at the electric...

1977 International model Cadet 80 I had one brought into my shop for loose mower deck pulleys. I took one of the mower deck spindles out and took it apart. It has a system with a gear that seems to tighten the pulley as it goes under power. I have never seen anything like this and...

Don't know that this THING is trying to prove. But if IT can't speak in English I say give IT the boot. I can see no use for it on this forum`:thumbdown:

It just seems that Mister Vippeter81 and minh robin lava just got all mixed up on what forum they were on. They just must of had too much to drink last night:thumbdown:

What is wrong with these people?

What is happing here with Cuc437432, :thumbdown:

Free Multimeter http://images.harborfreight.com/cpi/emails/2816/b_final/images/free_3.jpg I see that Harbor Freight is giving free multimeters. Its sure something you need when you are doing any electrical diagnosing.

Was going to order new mower deck blades for the Cub. Cub Cadet list three different style blades for this mower. Low Lift, High Lift, and hard coated. Dose anybody know that the different is in these mower blades and what they do? All I was hoping for was just a set of standard mower blades.

In the job of rebuilding the mower deck on my Cub's mower deck. I have found that all the idler pulley bearings are noisy and feel gritty. It just looks like they had used poor quality 6203 bearing in these pulleys. The pulleys them self's still look in good shape but are spot welded...

Not new to the forum but new to owning a 2206 Cub. One of my customers gave up hope on repairs and just wanted a new mower so he gave me his old 2206 Cub Cadet with a Kohler CH20 engine. I got it home and found bent push rods. I haven't taken it apart other then removing the valve covers, I...

I went on the nikas post . When I opened it looked like a good place to put a virus on my computer

I have a nice patch of Staghorn Sumac at my home which just seems to grow wild. I was thinking that I wanted to start a patch of it at my camp. What would be the best way to do this. Plant some of the small plants or some of the seed pods ? It grows and spreads fast and was hoping it...

This pass Saturday and Sunday ever time I tried to get on this mower forum all I could get was 502 Bad gateway. I even try it on two different computers and got the same thing. Now today its OK. Has anybody else ever had this problem? and if so what happen?

Had just got done rebuilding a HS50 Tecumseh on a wood splitter. It started right up and ran perfect. The only thing was it would only run for about 5 min's and the engine would quit running. One pull with the rope and it would be running again with the same problem over again. I was...

I have a old log splitter with a HS50 Tecumseh engine in it. The engine has seen it better days, using oil and puffs out of the breather vent bad. I was thinking it was OH time till I started pricing parts. Parts and my labor it will be cheaper to replace the engine with a Chinese Predator...

They made the model 13AM693G026 MTD two years, 2000 and 2001. I found out the hard way that the drive belt is one in. shorter for the 2000 then the 2001. Part number 248076 for the 2000 and part number 248077 for the 2001. Thank-you for the lesson MTD seeing I got the wrong belt and even...

I went to use my old worn out cord grass trimmer today. It is ready for the trash pile. I am in the market for a new battery power grass trimmer. I want something good quality and will last me a few years. I didn't really don't want a gas power trimmer because they are too heavy, noisy, and a...

I seen on earlier post 10 years for a mower life? First of all I buy used if I can. I bought my push mowers in the 70's, my JD 1980, my Wheel Horse 1991, and my Ferris 1999 new and only one I ever bough new. The push mowers only get used for trim work so they don't get many hours per year...

Just had a job come into my shop which was a tiller with a Honda engine. Ever time it would go under a load it would start running bad. I knew it needed carburetor work. When I went on line to look for parts I found a new carburetor only cost 18 dollars. I couldn't rebuild the old one for...

One of my customers is thinking about buying a new Craftsman mower. He was looking to buy one of the lower priced mowers. The mower he was looking at has a Craftsman 4 cycle 420cc engine in it. The only information on that engine I could find is it is made by MTD. Has anybody have any...

Its about time that a manufacture came out with this idea. I have seen it many times a person buys a mower and never changes the oil. I can see this coming more all the time with the newer synthetic oils coming out. They say the engine runs cooler so the oil doesn't break down, time will...

Here we are coming into the last of February. We just had another snow storm last night and its still going strong this morning. This is my first year of cleaning out my driveway with my ATV and a plow. I was working at it this morning and its getting to the point the piles of snow are...

I went to a farm show called Empire Farm Days. Kohler had a booth set up. So I asked the person at the Kohler booth about the cracked engine blocks they were having in the Courage engines. He told me that Kohler knew about the problem and was covering the cost of parts if the work was done...

I have a B&S gas tank that has sat a long time and now its rusty inside. The rust turn to a fine power when I stall gas and run the mower its plugs the carburetor. Has anybody have any ideas how to stop this other then buying a new tank? I now have the tank setting full of carburetor...

I don't like using fowl language but the man in the pop-up on top of the forum that waves his finger at me. It pi@@@s me off and I would like to brake that finger off and stick it in his a@@.

Well this year so far I have a mower and a chainsaw that wouldn't start. Both Jobs they were getting everything they needed to run. As soon as I put fresh gas in the fuel tank they both started and ran good. The old gas smelled OK yet but it lost its kick for the equipment to run.

Looking at some used JD mowers for my camp, R70, RX75, Gx75 can anyone tell me the different in these mowers

If you need another vote give this jerk the boot.

Looks like some more junk coming our way with chendshoome and his mulbeery junk

-------------------------------------------------------------------------------- Join Date:Mar 2013 Posts:4 Location:Chuabiet13 Mower:Chuabiet13 Hi?n chua cﾃｳ ph?n ?ng nﾃ*o t? nh?ng ngu?i trong cu?c sau khi bﾃ*i bﾃ｡o c?a El Confidencial du?c cﾃｴng b?. Looked a little deeper into this. hung24...

vﾃ*i thﾃ｡ng tru?c khi ﾃｴng tuyﾃｪn b? chia tay Barca mﾃｹa tru?c. Hi?n chua cﾃｳ ph?n ?ng nﾃ*o t? nh?ng ngu?i trong cu?c sau khi bﾃ*i bﾃ｡o c?a El Confidencial du?c cﾃｴng b?. dich vu tham tu,thﾃ｡m t? tu,tham tu tu, tham tu, thﾃ｡m t? Ever once in awhile this will come up. What does it stand for...

I am picking up lawn tractors for repair. A lot of the time the reason I am picking them up is they don't run or move by themselves. Now if I have a heavy tractor that moves a little on the hard side it become a problim for me to load. Has anyone ever install a winch of some type to load...

I have a Onan generator in my shop to get running. I sure hope I didn't get over my head with this job. The fuel system was all plugged up with real old gas which I believe I am OK with. The next problim I have is no spark to the plugs or voltage to the fuel pump. It looks like everything...

I have always been a good fan for the Kohler engine, (Until) Just got a Troy Built mower with a Kohler SV590 Courage engine in it for a repair job. Leaking oil bad. Disassembled the engine today and found large cracks in the engine crankcase and as far as I can see no reason for it. Seeing...

If you are going to need a flashing advertising why not do it with a Ferris a real mower? :biggrin:

I have some tree sapling that got started in my rhubarb pach. I have been trying to pull them out. The problim is how do you get a hold on them to pull them out by the roots? Everthing I try just slips off.

I have been putting a garden for years now and every spring I rototiller the soil. I was just looking at the garden tractors with the dirt plows trend. My question would be which would make for a better garden rototilling or plowing? It looks like a plow goes much deeper in the soil then a...

I went to the lawnmowerandtractor com and I agree with Kenny Spam.:mad:

A average mower engine runs somewhere around 3000 RPM. Other then a push mower I don't known what the spindle speed would be. The question is what would cut grass better a 30in blade or two 15 in blades. It just seems by the time you get to the end of the blade the 30 in blade would be...

What would be a good Idea for this forum would be for members a for sale/ want ad section. This section would not allow any commercial ads. Just like the trend jeffvador is parting out a tractor or if someone needs a part. I belong to a outboard motor forum and it has this trend and it has...

My grandson was looking at some old gas engines today and the person who had the old engines had what he called a hover mower. I brought it up on you tube and they do make such a thing and it looks like it works. This mower has no wheels but hovers. Has anyone ever used one or seen one in...

If you replace your gas filter make sure it is large enough. I just repaired a Bolens 14 HP and when I was done it would run bad when mowing grass. I had just changed the fuel filter with a small paper one I had laying around witch I found this was a mistake. I installed a new larger paper...

I have the head off a old Bolens with a Tecumseh HH140-160001 engine. I am trying to find new gaskets for this engine but they only have a listing for a OH140-160001 engine. They are both overhead valve engines and in the pictures they look alike. What is the difference in the two Tecumseh...

Have a model 68 for repairs, oil leaks (crank shaft seals) and mower deck. The mower deck had broken brackets and cracked. I have cleaned, rewedded the cracks and brackets. I now have the deck panted in Rust-Oleum rust primer. What could I use for John Deere yellow paint that will go over...

Bought a John Deere 185 that a exhaust valve broke off and put a hole in the top of the piston. Seeing the John Deere wants a 110$ for a new piston and seeing I am cheap and don't want to spend this much so I called a welding shop. They told me that they could weld the hole. Has anyone ever...

I am seeing on this forum that some high quality mowers are two cycle. The only thing I can remember about two cycle mowers was back in the 50's it was a cheap noisy smokey mower. How are these newer 2 cycle mowers. It seems like they would be a under powered, gas hog, and you would smell like...

WOT (wide open throttle) When I mow I always mow WOT. I figure that the equipment was designed to get max efficacy from WOT. The ground speed I regulate with the transmission. If the governor is working right you won't over RPM the engine.