Search results

I purchased a used Snapper Pro S200XT. For the past few years, I've been having a local shop change the oil, but I'd like to do this myself as I no longer have a trailer to take it to the shop and the shop's transportation charge is $90. I tried really hard, but I could not open the oil drain...

In a forum 2 days, I requested some help regarding my mower's wiring. 'StarTech' was kind to help me with the diagram. I then spent hours looking at it and following my mower's wiring to make sense of it all and then I wrote down what I learn, to help diagnose it now and also in the future. I'm...

Attached is the page from the manual that shows which parts of the ztr that need grease and which parts that need oil. My question is, how exactly is the oil applied and what type of oil? Does it come in the form a spray can? or do I put it in some bottle with a small nipple in the front and...

Hi All, Mower Info: Snapper Pro S200XT Professional, Model # 5901280. Engine Model Number: Briggs & Stratton 49T877-0010-G1 Quick Summary: Last year I changed the PTO switch because it had gotten loose. Later in 2023, the PTO clutch locked up and I had to have the repair shop replace it...

Hi All, Last year the PTO clutch locked up and because of this, I couldn't start the engine as the engine wouldn't turn over. The repair shop nearby told me to order a new PTO clutch and I did and they replaced it. I only used the PTO for 19.1 hours this year and the mower stopped again while...

Hi All, My Snapper Pro S200XT stopped while mowing. It wouldn't crank after that. I checked the battery and the voltage was good. I then checked the fuses and one 20amp fuse was blown. I replaced it and tried cranking again. The flywheel turned a little, (half inch maybe) and then the fuse blew...

My Snapper Pro 200XT isn't starting. I do hear a click. Battery is showing showing 12.49 volts. I'm also getting 12.49 volts from the battery side of the starter solenoid and the battery's ground. But when I crank it, I'm only getting 6.6ish from the starter side of the solenoid and the battery...

While attaching a new drive belt, I had to pull the PTO plug out of its socket and while doing that the black wire had come out of the plug. I had pushed it back in but then it came off again during mowing. I used some glue after pushing it in there, but it didn't work. Any suggestions? I'm...

I've had my mower for 3 years (Snapper Pro S200XT - bought it used at 400, now has 580 hours on it). It went in for repair and I had them change the hydraulic fluid as well. In the last 3 years, I never changed or added the hydraulic fluid, I had heard that it's good for about 400 hours (please...

My fuel gauge on Snapper Pro S200XT showed very little fuel even though I had just filled up the tank. I used a flat head screw drive to pry it out. I had a bucket of water and and I put the fuel gauge in there and the device underneath lifted up. But when I put it in the fuel tank, it sank...

Hello, The drive belt came off of my Snapper Pro S200XT. I'll be ordering a new belt today, but I still wanted to put the old one on, just so I understand the process. (When adding the new one, I know I'll have to remove the mower belt and clutch plate as well). Using step 4 of the attached...

Youtube videos show many mowers have two levers, one on each side of the engine. You change their position to disengage the hydraulic bypass valve. Snapper Pro manual says to "Open the Hydraulic Bypass Valve. To open the bypass valves, turn the bypass valve, which is located on the side of the...

Hi All, I saw two black wires coming out from the key area on my Snapper Pro S200XT Zero Turn Mower. One of them is linked to the Choke control, but the other one isn't linked to control anything on the key area on the right side. The lower black cable is for the choke, what could the upper...

Hi All, My battery died on Saturday and I bought a new battery on Monday and it showed 12.57 volts, but when I started the engine it was showing 12.45 volts meaning it wasn't getting charged by the stator (alternator). Perhaps the old battery wasn't bad and I shouldn't have returned it, but all...