You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Zero turn loosing power when engaging mowing deck why?
- Thread starter Booze
- Start date
More options
Export threadbertsmobile1
Lawn Royalty
- Joined
- Nov 29, 2014
- Threads
- 64
- Messages
- 24,705
Slip the deck belt off completely and check all spindles and pulleys for free rotation.
Mad Mackie
Lawn Addict
- Joined
- Jul 11, 2011
- Threads
- 50
- Messages
- 1,851
Disconnect the clutch electrical connector, run the engine and turn on the PTO and see what happens. With the engine shut off, with a multimeter in the Ohms setting, check the resistance in the clutch coil. Also check clutch terminal to ground. Let us know what your readings are. Clutch should be no less than 2.6 Ohms and infinity from each terminal to ground.
Last edited:
Tinkerer200
Well-Known Member
- Joined
- Mar 14, 2015
- Threads
- 4
- Messages
- 913
Well it would be helpful to know what engine we are talking about, model number. IF it is a twin cylinder, is it running on both cylinders? Sounds like it isn't to me. IF it is a twin cylinder B&S in particular, remove the valve covers and check the push rods, etc.
Walt Conner
Walt Conner