LarryC3315
Member
- Joined
- Mar 18, 2020
- Threads
- 4
- Messages
- 18
I was using my mower to move some equipment around yesterday and got some loud noises from underneath and then it stopped. No forward or reverse. I pulled the deck and the drive belt. The drive belt was badly chewed up. The belt was hitting a piece above the forward pulley system on the cvt. The shaft was wrapped in strings that had peeled off the belt. I got that all removed and bought a new belt. While installing the new belt I realized there was something missing on the forward pulley system on the transmission. I did some walking around and found a piece that fits over what the belt was hitting. But, I'm sure I'm still missing at least one part. I have pictures of the area I am referencing and the part I found. If anyone can tell my what I'm missing and where I can get it, I'd sure appreciate it. Turns out my pics are too large. I bought a shaft collar to keep the piece I found in place, but it still hits screw tops on the pulley below on that shaft.