Welch plug removal / install

silver1

Well-Known Member
Joined
Oct 4, 2012
Messages
415
I got the old plugs out. How do you install the new ones?
Thanks
 
Tap the center of the new plug with a hammer and punch and it will expand. Just don't get too strong with the hammer.
 
Tap the center of the new plug with a hammer and punch and it will expand. Just don't get too strong with the hammer.

I removed the old plugs and installed new ones (2) thanks. The internal passage was very dirty. Now to install and see if it leaks!
LB
 
I removed the old plugs and installed new ones (2) thanks. The internal passage was very dirty. Now to install and see if it leaks!
LB

No leaks. Still will not adjust. surges, high RPMs, no idle. same old ****.
I still think it is the wrong carb. that came on it. The 632991 is correct
I think, but not what is on it.
 

Attachments

  • 632991.JPG
    632991.JPG
    1.3 KB · Views: 24
Back
Top