Toro 21" Rear Bagger Air Filter Housing Removal

[enginejen]

Newbie question... How do you remove the air filter housing (not the lid) from the Toro 21" Rear Bagging push behind mower?

Thanks
Jen

 

[Vervepipes]

That's a loaded question, through the years there have been many engines used, several even in a given year, you'll have to be more specific I'm afraid.

 

[enginejen]

The engine says OHV GTS on it. I can't find a model number any place sane. I got it used with no documentation. I just got it started finally by priming it with a bit of gasoline through the air inlet (probably one of those dangerous things that you are not supposed to do or even worse admit to doing). I would still like to take the air filter housing off and see if I can replace it. It is warped and the lid will no longer attach. Until then duct tape...

Jen

 

[Rivets]

Give us the model and serial numbers of the mower. We will be able to figure out the engine numbers and how to help you.

 

[enginejen]

Can you tell me where to look for the model and serial number? I'm not finding it anywhere. Thanks.

Jen

 

[Rivets]

It is either on the back of the mower deck or under the handle. If you can't find it take a couple of pictures and I should be able to figure out the model number.