timing

[joey74]

Did you just take the flywheel off it did you get inside the engine

Yes I got inside engine put new rings in sorry if I didn't make it clear. Thanks!

 

[Carscw]

Sorry I worded it wrong also.


Can you post the engine model numbers and I will tell you how to line everything back up.

 

[joey74]

Did you just take the flywheel off it did you get inside the engine

I got in side engine!

 

[joey74]

Sorry I worded it wrong also.


Can you post the engine model numbers and I will tell you how to line everything back up.

numbers on engine are 287707 0220 01 9308044a

 

[Carscw]

I know this is not what you have but it's close.

Just like in the pic line up the dashes with the piston at TDC

If you need I can take one apart when I get home so you can have a better idea

 

[joey74]

I know this is not what you have but it's close.

Just like in the pic line up the dashes with the piston at TDC

If you need I can take one apart when I get home so you can have a better idea
View attachment 22666

Ok I think I have it. as long the piston is at top dead center on any stroke is this right?

 

[joey74]

I know this is not what you have but it's close.

Just like in the pic line up the dashes with the piston at TDC

If you need I can take one apart when I get home so you can have a better idea
View attachment 22666

I'm still confused with piston at top dead center marks don't line up. But if you line up dots on crank and cam one way but if you turn engine one circle the dot on crank is across the cam on other side. Sorry I don't no what I'm doing. Please help me can't aford a new mower. Thanks Joey!

 

[exotion]

If you keep spinning it it will realign...

 

[mechanic mark]

https://www.google.com/webhp?source...-8#q=how to set timing on b&s 14hp ohv engine scroll down to timing

 

[mechanic mark]

Results