Starter Spins But Won't Crank

[jimshoe52]

Before purchasing a new starter I would remove the starter and do a little troubleshooting. I suspect the clutch is just stuck on the shaft and needs a little cleaning and light coat of lube. You have to remove the starter either way so troubleshooting before purchasing may save you $$$$.

Yes, I plan on doing that before ordering anything. Thanks.

 

[Tiger Small Engine]

Yes, I plan on doing that before ordering anything. Thanks.

Just remember if you open up the starter to inspect and clean/lubricate it, you have to deal with correctly installing the brushes, which can be a pain.

 

[jimshoe52]

Yes, that video I watched showed how the guy took the starter apart. And, he took great pains with the brushes. But I don't think I'll be messing around those parts. I'm going to check out the pinion clutch, if worn down it'd be cheaper for me to buy a new starter from Amazon.

 

[jimshoe52]

Yes, that video I watched showed how the guy took the starter apart. And, he took great pains with the brushes. But I don't think I'll be messing around those parts. I'm going to check out the pinion clutch, if worn down it'd be cheaper for me to buy a new starter from Amazon. Oh, and thanks for your input on that.

 

[Rivets]

He doesn’t have to open the starter motor, as he says it spins. Just needs to remove the top case to inspect the clutch.