Mower girl 1
Forum Newbie
- Joined
- Jun 7, 2018
- Threads
- 1
- Messages
- 5
Hi all.
I have a MTD 13H2765F600, or MTD Thorx382 EVO1 420 cc.
I am so excited to have found this site.
I had my belt replaced and was charged €150 for the pleasure.The belt broke after 2 hours of use. I decided to do the next one myself. I took a spring off near the belt drive platform before I pulled it out and took off the cover. I have a 3 wheel belt drive. I put the new belt on no problem. I attached the spring to where I thought it belonged and started her up. The spring is attached one end to a rod attached to the forward, neutral and reverse lever. Now the mower will only go forward.
I looked at another post that said the spring attaches to somewhere behind the back wheel. I disconnected mine at the front.
I would really love some help. Any advice would be greatly appreciated.
Thanks Debbie
I have a MTD 13H2765F600, or MTD Thorx382 EVO1 420 cc.
I am so excited to have found this site.
I had my belt replaced and was charged €150 for the pleasure.The belt broke after 2 hours of use. I decided to do the next one myself. I took a spring off near the belt drive platform before I pulled it out and took off the cover. I have a 3 wheel belt drive. I put the new belt on no problem. I attached the spring to where I thought it belonged and started her up. The spring is attached one end to a rod attached to the forward, neutral and reverse lever. Now the mower will only go forward.
I looked at another post that said the spring attaches to somewhere behind the back wheel. I disconnected mine at the front.
I would really love some help. Any advice would be greatly appreciated.
Thanks Debbie