Rough running B&S Quantum XTE 6 hp

[dannac]

Born March 2, 2002.

Haha good one !

Attached images of flywheel and carb.

Carb looks very clean.

Thank you !

 

[dannac]

Sprayed carb cleaner in small holes in carb and on bottom nut.
Used small wire to try and clean.
Put new spark plug and put it back together.

At first it seemed to run better but then started surging again like original video.

 

[andrewslarge]

Great job! Do it again 3X
How about the bowl nut/main jet?
The surging is usually from the small jets on either side of the choke butterfly.
What choke/carb cleaner are you using?
Any compressed air?
Might need a new gasket?

You are lucky it has the teeth on the flywheel! You can add electric start for about $50 including the two bolts to hold it on.

 

[andrewslarge]

Here is the gasket.

 

[dannac]

Shop Pro carb cleaner spray can with red tube.

Sprayed the bottom nut holes and the hole I could see from where the bowl was.

Did not know there are two each side of butterfly ... will try next.

Do have an air compressor and will try that also.

Thanks.

 

[dannac]

Thanks for that part number for gasket.