Partner k650 mark II stump grinder

C

Ckn087

Active Member
I have a friend that brought me a Partner K650 mark II stump grinder to work on. I got it fixed but cannot find the correct air filter. He brought a part number some shop gave him which is 505315571. The model on the machine is 2480405. I found some on amazon that say k650 but not mark II but active II & III. And they all say concrete saws. Do these take the same filter? Any help would be appreciated as he needs one asap. Ps. This is not the pre-cleaner that he needs, but the main paper pleated one.
 
Scrubcadet, that's the one I'm talking about. It says it's for a concrete saw instead of a mark II stump grinder. Are they the same filter?
 
The K650 is the just the engine and that engine will be used on a lot of different items .
Lots of very heavy load application will use that engine which is essentially a chain saw engine.
So you will see it on a chain saw ,concrete saw, stump grinder. metal saw, demolition saw etc etc.
All just variations on the basic theme of a chain saw with an extended arm that has a blade hanging off the end of it
 
bertsmobile1 said:
The K650 is the just the engine and that engine will be used on a lot of different items .
Lots of very heavy load application will use that engine which is essentially a chain saw engine.
So you will see it on a chain saw ,concrete saw, stump grinder. metal saw, demolition saw etc etc.
All just variations on the basic theme of a chain saw with an extended arm that has a blade hanging off the end of it
Click to expand...
Well that makes sense lol. He swears that filter is too small but I'll try it.
 
You must log in or register to reply here.
Back
Top