John Deere speed

Fish

Lawn Pro
Joined
Aug 2, 2013
Threads
11
Messages
5,143
Look at the blowup on the thread!!!!

Bolt # 3 And pulley #31, that is obviously an adjustment point.
 

Fish

Lawn Pro
Joined
Aug 2, 2013
Threads
11
Messages
5,143
That should do the trick, if not, someone may have put on a smaller idler pulley, but that is the adjustment point.
 

Rls8836

Active Member
Joined
Jul 13, 2014
Threads
21
Messages
59
Thanks Fish I got out there this morning laying under the mower and finally, I saw it. Just what you said. I replaced the belt and probably didn't even need it. I could have tried adjusting that on the old one, might have fixed it right there. Thanks for the reply, this site is good help.
 

Fish

Lawn Pro
Joined
Aug 2, 2013
Threads
11
Messages
5,143
Most brands do not have any way to adjust, so you were lucky there.
 

Fish

Lawn Pro
Joined
Aug 2, 2013
Threads
11
Messages
5,143
Also why I like having the tractor and engine's model/spec numbers, to look at the blowups, the fix could be right there....
 
Top