orionengnr
Forum Newbie
- Joined
- Nov 15, 2020
- Threads
- 4
- Messages
- 6
Okay, I have had 3-4 HRR216s, one keeper, several fix-and-sell.
The latest is an older K3 model with BBC and throttle control (all my priors have been single speed, Auto Choke, etc.)
So this one is being a bit more problematic.
Prior owner changed out the carb, no idea what else he monkeyed with. Would not run when I bought it for $50.
Got it running, but only at low rpm--advancing the power lever does nothing (moves the linkage, but does not increase engine rpm).
Watched a bunch of YT vids, tried messing with the governor, I can make it over-rev or I can make it under-rev, but I can't make it respond properly to the throttle.
Any suggestions are welcomed. Thank you in advance, Rich
The latest is an older K3 model with BBC and throttle control (all my priors have been single speed, Auto Choke, etc.)
So this one is being a bit more problematic.
Prior owner changed out the carb, no idea what else he monkeyed with. Would not run when I bought it for $50.
Got it running, but only at low rpm--advancing the power lever does nothing (moves the linkage, but does not increase engine rpm).
Watched a bunch of YT vids, tried messing with the governor, I can make it over-rev or I can make it under-rev, but I can't make it respond properly to the throttle.
Any suggestions are welcomed. Thank you in advance, Rich