Good morning to everyone, I hope I am putting this in the right place. I have my neighbors Husqvarna 61 in here as a favor servicing it and everything went well until I wanted to start it to circulate the new oil and it hasn't hit a lick since. First to tell you I had to take fan shroud off to clean the big ball of last years grass out, I put it back together and all it does is spin won't even try to hit spraying carb cleaner in carb and I can't see a spark except when I use a test light and get enough fire to light it but I know this is not telling me anything, I stuck a screwdriver in the plug wire and held it and there was no current no shock at all when I spun the engine over, I have serviced this engine for several years but never had a problem. Hopefully it is something simple and someone has an idea, going to try post all info necessary. Thanks in advance, Bill Dotson. FR730 V-BS14- R--E/NO FR730VB25726 Kawasaki , it's on a Husky MZ61/ 967277502 //,Engine Family;KAXS. 726N4CA ;;e13*97/68SN4G2* 2004/26*0615*03.