T tinkertoy Forum Newbie Joined Aug 27, 2014 Messages 1 Aug 27, 2014 #1 I have put a kit in a 18 hp briggs and stratton carb,its the carb that has the back fire mechanism on the bottom,2 screws holding the bowl on whats causing this to fill the engine block with gas?Thanks in advance.
I have put a kit in a 18 hp briggs and stratton carb,its the carb that has the back fire mechanism on the bottom,2 screws holding the bowl on whats causing this to fill the engine block with gas?Thanks in advance.
P Pumper54 Well-Known Member Joined Jun 19, 2014 Messages 819 Aug 28, 2014 #2 Sounds like the needle/float is sticking in the open position, you might want to remove the carb/ bowl and see what is going on. Tom
Sounds like the needle/float is sticking in the open position, you might want to remove the carb/ bowl and see what is going on. Tom
Support Lawn Addict Community Leader Joined Jul 23, 2010 Messages 1,549 Aug 28, 2014 #3 Welcome to LawnWorld! :welcome: We moved your thread to the Small Engine & Mower Repair forum.
M Mikel1 Well-Known Member Joined Jul 21, 2013 Messages 897 Aug 28, 2014 #4 Yeah I would check the float needle and float. Did you replace the needle seat?