725EXI Sump Replacement. Please Help

lonzo2003

lonzo2003

Forum Newbie
I own a Husqvarna HU 725AWDH and the previous owner hit a stump with it and the shear pin didn't break but it did snap the sump and I have been trying to find the specific part and I have had no luck. I would really appreciate any help. Thanks
 
We are going to need the model number of the engine to assist you. If one of the newer briggs engines the model number should be engraved into the side of the block behind the muffler.
 
ILENGINE said:
We are going to need the model number of the engine to assist you. If one of the newer briggs engines the model number should be engraved into the side of the block behind the muffler.
Click to expand...
Thank you I have been trying to figure out where the number is.
 
Help to find your model number :
www.briggsandstratton.com

Find Your Lawn Mower Engine Model Number

Looking for your lawn mower engine model number? This Briggs & Stratton Engines video shows common locations to find it on push mowers.
www.briggsandstratton.com

Are you sure the crank is not bent with a broken sump ?

When you got the numbers you can have the owner manual and the Illustrated Part List to search your part with B&S part number :

Find Manual & Parts List | Briggs & Stratton

Find your Briggs & Stratton manual or parts list easily by locating your model number and using our resources for part identification and ordering.
www.briggsandstratton.com
 
You must log in or register to reply here.
Back
Top