725EXI Sump Replacement. Please Help

[lonzo2003]

I own a Husqvarna HU 725AWDH and the previous owner hit a stump with it and the shear pin didn't break but it did snap the sump and I have been trying to find the specific part and I have had no luck. I would really appreciate any help. Thanks

 

[ILENGINE]

We are going to need the model number of the engine to assist you. If one of the newer briggs engines the model number should be engraved into the side of the block behind the muffler.

 

[lonzo2003]

We are going to need the model number of the engine to assist you. If one of the newer briggs engines the model number should be engraved into the side of the block behind the muffler.

Thank you I have been trying to figure out where the number is.

 

[Mkala]

Help to find your model number :

How To Find Lawn Mower Engine Model Number | Briggs & Stratton

Looking for your lawn mower engine model number? This Briggs & Stratton Engines video shows common locations to find it on push mowers.

www.briggsandstratton.com

Are you sure the crank is not bent with a broken sump ?

When you got the numbers you can have the owner manual and the Illustrated Part List to search your part with B&S part number :

Find Manual & Parts List | Briggs & Stratton

Whether you are putting your equipment away for the season or needing to replace a part, locate your equipment or engine manual to get the information specific to your product.

www.briggsandstratton.com