transmission

I have a new Broadmoor with less than 30 hours. When mowing under my gum trees it often throws the drive belt at the trans unit pulley. I think the deck is picking up Gum balls and they are being thrown under the drive belt causing it to roll off the pulley . Has anyone experienced this and...

My transmission belt keeps breaking. Is there a tension adjustment, if not any suggestions?

I've got an older apx. 2000' 20hp I believe, LT2000 Craftsman rider. I'm told the transmission is shot. Can the transmission be replaced with another craftsman transmission, say from a LT1000, Are parts like that interchangeable? Thanks guys

I took the blade off, prompt up the mower, started and engaged the transmission and it doesn’t appear the pulley on top of the transmission is spinning. Should that pulley be free moving? Would I gain anything by taking off the small plate on the side to see if something is locked up? Seems I...

Just replaced pinion gears, and adjusted the drive engagement: Under no load the rear wheels full engage and drive properly, but in use if I "fully" engage the paddles, the gears "chatter" and seem to skip. (Note: the old pinion gears were substantially worn done nearly 75% of the way, with only...

Is there a maintenance schedule for the transmission? I've had the same mower for over 20 years and if there's fluid in the transmission, I'm thinking it could be due for a fresh refill. Also, exactly how would I drain and refill the fluid(s). Also, has anyone discovered a way to replace the...

Hello to everyone, looking for some advise. I have a bit of a problem with my 2004 stiga park pro 20, The power assisted steering is gone knotchy and hardish to turn either way, I have changed the filter and the oil. I think the transmission and the steering share the same system and oil. Has...

JD E120 does not go forward or backwards. Do not hear any whirling or grinding sounds just does not move. Tractor can be rolled forward and backward whether the bypass rod is engaged or not. When it’s engaged, there is a little ticking sound as it rolls backwards. From previous car experience...

Good morning, is there anyway to order this part alone instead of buying the whole assembly?

Hello all, I can find this pulley on the Honda parts websites, but there is no part number. Item 15 I believe. Transmission number is 20001-vl0-m00 Does anybody know the part number for this? Possibly have a link? My son's lawn mower and I would hate to have to buy $155 transmission just for...

ZTX5 with ZT3200 Hydro Gear pumps. Anyone used their kit to change fluid ? Thinking about doing it myself. Just wondering how difficult it would be.

After pulling my mower out yesterday I noticed while mowing it was starting to slow down. Let off on the pedal then pushed back down and it seemed to work fine. It keeps doing this so I stopped and called the dealer who said to check the drive belt and the splined pulley. It is up under the seat...

Hustler Raptor SD60. Drive belt failed and I put it in drive with levers and towed it about 75 feet behind car and wheels were turning(I was tired and forgot to release transmissions). I eventually changed drive belt and tested drive function in air on jack stands(it passed). I set it down and...

I have a Toro MyRide 54 zero turm mower and the left transmission gets noisy and weak after mowing for 30 minutes or so. I can't find a dipstick, fill plug, or filter on this model. Does anyone know how to check the fluid or have had a similar issue?