Search results

I have a ferris 5900030 Kawasaki FS600V-GS01 Twin Full disclosure, I was working on another forum with this project The members were extremely helpful but the site has become unreachable to me. Getting a 404 error. I'm not sure if the site is temporarily or permanently down. But I digress. I...

I have a 917.288570 for which I need a deck. Part number on the deck is 532425383. I'm looking for a used one and was wondering if anyone knows of any other makes that would fit the bill as well. I recently installed a scott's deck on a john deere that was an exact match. I'm hoping to find out...

I have a YTH21K46-96045002100 tractor. DOM 2009. A part of the blade engagement clutch broke. They sell it as an assembly. Part# 532406563. Apparently, it's discontinued. I found some other part numbers that look very similar but obviously different in some ways. I'm wondering if someone has...

Model: 917.271760 Serial: 091302D007110 Briggs Model: 31R977-0043-G1 / 160218ZA Starter spins but the bendix does not pop up and engage. If I spin the bendix by hand everything seems to function properly and move freely. I have 12.8V at the battery, which is new. Voltage drops to 11.8v at the...

Engine: 5X65RU Serial: 1509173B0648 I think those are the engine numbers, etched on the rear of the engine case. Machine Model: 25A-262J756 Serial: 1J225P10282 I can't for the life of me find the torque specs for the flywheel. It's a 159cc engine. I've found parts diagrams but can't find...

GXL110A119758 I'm working on an L110A that needs a new gas tank. I found an aftermarket on Amazon for $150, which is much cheaper than the OEM it seems. I was wondering if anyone had any experience with aftermarket tanks for the JD, fitment, etc. Thanks...

I have a ferris 1000Z machine model: 5901004. I was wondering if anyone had any experience with installing a new engine on these. Meaning are there any budget engines out there that will fit well without too much modification? Thanks

I have a PB-413H P09512037030. According to the parts diagram, I have a C1M-K77 Carb. I cleaned it and I lost track of the hi and low screws. Once has a tad longer with a bigger shoulder and less threads. I tried looking it up on Zama's site but the carb shown is different and I'm having trouble...

Model: 965 18 59-03 Serial: 81004572 Manf. 2008 I just noticed a loss of power and some smoke coming from the pull cord on my blower. I think the seal behind the recoil and pulley assembly is leaking. Although these problems may be unrelated, I'm trying to get a look at the seal but I'm not...

MTGHS - 105979 The left wheel seems to hang up during the initial attempt to move forward or backward. It just goes in a circle. Seems like the e-brake is hanging up over there. The machine only has 700 hours. Seals on the trans say not to fiddle with them until 1000 hours or void warranty. The...

I was wondering if anyone had any recommendations for software to run a landscaping, tree care, or other similar business. It's actually for pesticide treatment but I think there's some crossover as it is a similar type of business. I apologize if this is not an appropriate question for the...

Sorry but I can't find any other meaningful numbers on this piece of equipment, as far as model number, serial, etc. I'm trying to identify the property RMP this should be operating at full throttle. I can't find it in the manual for the PR 46BT. Any help would be appreciated. Thanks

I know this is the buying forum but I think this question relates. Can't have a buyer without a seller right? I often acquire equipment and was wondering if anyone had any advice as far as resources for the value of equipment. I'd be willing to pay a reasonable fee for the service if necessary...

Briggs: 407777-3195-G5 I just got a new air filter for this engine and it came with a pre-filter. The original did not have one. Do I use it or will it screw with the mixture? Thanks.

Does anyone know how to identify an old Troybilt Tiller? I've been having a hell of a time with this one. Guessing it's early 80's. Serial number looks like S1225 C1. I read that the old ones don't have model numbers. This is a Pony. I've been struggling to find parts for it because I can't...

RY34001 EUP1190640 4-29-2011 I just did a carb on this 4-stroke weed trimmer. I had a hell of a time finding the carb as well as any documentation on it. Now that it's running, I'm trying to dial it in but can't find any specs on the RPM. It's running at about 7500 on the top. Has anyone worked...

Coleman Powermate 5000 EX300D520117128 This is a Coleman generator with a Subaru / Robin engine. The carb has an adjustment screw on it that doesn't seem to do much. No matter how many times I turn it, it doesn't move. It has a metal bracket screwed in next to it in the empty hole that holds it...

I read that the "R" means it has a resistor. Is it ok to substitute say an RJ19LM into a machine running a J19LM? Also, I'm wondering about the "s" at the end of the briggs plugs. For instance, 796112 vs 796112s. Can these be substituted for one another? Thanks.

I have this generator. MF6500 Model: 01006-1 Engine Ident: EHF-00958-2 Frankly, the best luck I've had so far is searching this number on a sticker on the recoil starter: GN 360. Came in with the usual no start, filthy carb scenario. I cleaned it well, including a trip through the ultrasonic...

I got this 917.289700. Drive belt came off. After inspection, It appears that the front trans mount broke. One of the bolts connecting the bracket to the torque strap is gone (I think the hole on the trans is stripped a bit). The two-holed brackes on either side where the transaxle mounts to...

I'm looking to get the tools necessary to measure cylinders. As usual, there are so many options and reviews. I'm looking for some advice on both methods and tools. Is anyone particularly happy with their tools for this process? Would you be willing to share a recommendation? From my...

Craftsman: 917.289700 This came to me because the owner bent a spindle/mandrel. When I got into it, I noticed that the teeth were gone on both pullies. So I ordered a couple of those. The spindle I was replacing was original but the other had been replaced some time ago. I noticed on the one he...

Model: 74325 Serial: 250002187 I've had this machine for 15 years now. It came with a set of high lift blades. I've replaced them once and remember having a really hard time finding them. The blades on the parts list are medium. This time around, I'm having an even harder time but managed to...

Model: 20462 Serial: 5919235 Briggs Engine: 128802-0612-01 95022356 I think I know the answer to this but just because I've never seen this type before I'll ask; Does this throttle control bracket look fumfered up? Bent maybe?

Efco AT 9500 Back Pack Mister EXH/EVG Family KE8XS 0775CF (Not sure if this is helpful) Serial: 54894800121119 Another number on the machine is: 9999450128 76.5cc This runs well 90% of the time. The owner reports this procedure: Prime, choke, pull twice and it starts for a second then stops...

So I have a PB 251 blower here and wondering where I should be on compression. This machine doesn't run and I have about 80LBs of compression. I think the spark is weak as well. I'm thinking this is a candidate for the junk pile but wanted to verify.

I was looking to replace a spark plug on a lawnmower. The plug for the machine is an NGK-BPR5ES. I cross-referenced on 2 different web sites that say an acceptable replacement is a Champion RN12YC. Everything looks identical except for the fact that the side electrode hangs about 1/8 inch longer...

I have a kohler cv490-27532. I just put a new head gasket on but am having a problem with the rods, rockers and lifters. It appears that one of the hydraulic lifters doesn't want to go all the way down. When I tighten the rocker bolt, it opens the exhaust valve about 1/4 inch, no matter where...