Search results

So the bore size for K321 Std is 3.50. I measured my bore at 3.505-3.508. Do I order a Std set of rings or .010? How bout piston? Std or .010?

I know the specs call for .020 on the points, but what if the engine has a lot of hours on it? Would the settings lean towards over the .020 or under like .015 or something? Anybody have any experience with this? At .020 the engine has trouble starting and seems to backfire out muffler and...

Does the Kohler k321 engine call for a Carter #26 or #30 carb? I have a 1973 New Holland S14 with the K321 Kohler and it has the Carter #26 on it. Don't know if it's the original carb or not?

My Kohler k321 seems to be blowing smoke out from around breather. It's either blowing from the hole in breather or out around the rectangle plate gasket? What would cause this and how do I correct the problem? Thanks

Anybody know part # for carb bowl bolt on a K161 7hp Kohler? Thanks

Anybody know where I can find a Kohler K161 rebuild kit? If so how much? Also what Flex Hone would I need for deglazing cylinder wall? Just wanna put cross hatching back on. Thanks

Getting ready to restore a 1966 Cub Cadet 71 that has a Kohler K161 7hp engine. Tractor has a 38" deck and was wondering if this small of an engine can handle that size deck? Oops wrong forum lol.

Had a John Deere 214 gave to me with a Kohler K321 in it. Tractor caught on fire from fuel leak and melted hood off it. Coating was melted off some off wiring so I black taped all exposed wire. Put new battery in it and it turns over but no spark. Could heat from fire ruined the coil or...

Have a chance to get a John Deere 214 mower with a single cylinder 14hp Kohler engine. The mower caught fire and melted the hood pretty good, although they said they put fire out fairly quickly with water hose. Is this particular engine worth saving as long as fixable? Thanks

A guy is asking $100 for this 1967 Cub Cadet 123 model. Think it's worth buying? Needs 2 front tires replaced. Has no battery. Hasn't ran in over 2 years. Engine turns over by hand. ( not seized up). Was gonna try and restore it?

Wanting to buy a decent Cub Cadet 123 . Thanks How much can i expect to pay.

Wanting to buy a decent Cub Cadet 123 but don't know what to pay? Anything in particular I need to lookout for? Thanks

For future reference for those who might want to know. Main nozzle tap size is 5/16 x 24 UNF. The brass emulsion tube fit great after running tap thru hole. Threads just needed touched up. Thanks !

I think I can salvage this carb. Boogered up threads on main nozzle in my Walbro 4993 carb. Briggs part # on carb is 799727. Just wanting to know tap size where brass emulsion tube goes. THANKS!

Looking for a cheap Briggs and Stratton carb for a 16hp Vanguard engine. A Walbro LMT 4993 carb came off it. I believe the Briggs part number is 799727. Its a gravity flow carb.Know where I can get a used one? Thanks

Have a nice clean 2008 Huskee 42 inch cut mower with a 22hp Kohler Courage engine. Just rebuilt carb. Has new deck belt, air filter, oil change and filter, new battery. Hydrostatic. How much should I ask for it? Runs great.

My buddy has a Husqvarna mower with a Kohler Courage 24 hp Vtwin. When you move throttle position from lowest setting (idle) to up, engine doesnt increase rpms until lever is about half way up. Is this in need if adjustment, and if so how to do it? Thanks

First of all, cant find model number anywhere. supposed to be stamped on transmission on right side. took wire brush to it and nothing. But anyhow need help with triple pulley. Will try to post pic to help understand. Pulley seems to be wobbly and im pretty sure im missing some parts in front of...

First engine rebuild. Briggs and Stratton model 130297 1665 01. New decals and paint job too.

What is the correct procedure for finding TDC on L head engine for valve lapping? Engine is a 130297 model, made in 1983. It's a magnetron too. Thanks And by the way here is the engine. My first ever rebuild.

I have a 22hp Kohler Courage single cylinder engine. It has a Walbro LMK carb on it. There is only 2 adjustment screws on it. One is a long black plastic screw, that only turns a quarter to half around. What does this adjustment do? I've turned it all the way left and then to the right. Doesn't...

I have an Encore Z42 mower and was wanting to do some touch up painting. I know I can get Encore red paint for like $20 a can, just wondering if any other color is close? Thanks

My Encore Z42 has 330 hrs on it and probably due for valve adjustments. Anybody have in experience at this? Engine model is the Kawasaki 17 hp 500FHV. Thanks