Search results

I just acquired a Honda hr214 SMA with electric start. I certainly don't need the electric start because it starts so easily with the pull cord but I want to get it working. I don't have the charger and assume the battery won't charge seeing that it's from the late 80's. I found a few places...

I have a complete lawnboy bricktop motor (model 5023) that I dissassembled for a rebuild/restoration but never got around to completing. The engine ran before I took it apart and I'm sure someone would be interested in taking the time to bring it back to Life or use it for parts on other...

I picked up an old JD 522 snowblower for use this winter. It was in pretty rough shape so I decided to give it an overhaul. I've got everything done except the wheels and engine. Still waiting for parts, hopefully they arrive before the snow!

Hi, I'm trying to disassemble the augers and drive shaft from the housing of a JD 522 snowblower. I've removed the side panels to release the auger shaft on each side. The main drive shaft that goes through and connects to the rear pulley is giving me problems. I've removed the pulley and...

I just picked up a 10422 that I plan to clean up and use. I removed the engine from the deck which leads me to my first question. 1. Are all three holes (mounting location) where the engine attaches to the deck supposed to be raised or domed? As you can see in the picture one isn't like the...

Hi, I have a 20622 that won't roll in neutral. I pulled the transmission and opened it up to see if there was any unusual wear. Everything looks to be working properly with no visable wear. I can switch through all 3 speeds and see that they are working properly with the case open. My problem...

I just got a free mcculloch maccat 38cc 18" bar chainsaw. I disassembled and cleaned every nook and cranny, replaced all fuel lines and rebuilt the carb. It runs like new but seems to be pouring out oil from the bar oiler. Is there any way to adjust this?

Hey guys, So this is my first project mower. I picked this up cheap and wanted to bring it back to its original glory. It's a working machine with good compression, just shows a lot of age from being left outside for a long time. Most everything is cosmetic and cleaning but never the less, I'm...

I'm working on my first duraforce LB and hope someone can tell me if the exhaust plate that covers and holds the U shape pipe is supposed to have a gasket. Mine has what looks like a silicone bead applied around the perimeter. Was this standard from the factory? I also noticed a lot of thick oil...

Hey guys, I just picked up a Duraforce 22260 that I'm in the process of tearing down for a cleanup and re-paint. Everything was going well until I broke the bolt that secures the toe bar to the deck. Just to be clear, it's the metal bar that spans across the deck chute. I ended up breaking them...

Hi, I just replaced the wheels and capstan rollers on my LB 8461 commercial. When I start engaging the self propel, the right wheel contacts the capstan prior to the left. It's a very small gap,and when fully engaged they are both compressed on the wheels. I was wondering if there is any way to...

New to the forum Lawnboy fan. Lawnboy S21ZSR Lawnboy Commercial 8461