Search results

I have gone through the bleed process multiple times. I just completed the process again and the wheels turn but the steering levers have gotten very stiff. The oil is still at required level in the reservoir. The reason I replaced the oil and filters was because the steering was hesitant on the...

My lawnmower is very slow in moving when first started. It takes a while of working the controls for it to move like it should. I have removed the old fluid, filter, strainer, and used compressed air to remove all the old fluid from the system. It worked better for a short time but with the...

Thanks for taking time to reply. WL McCabe

After requesting info on the proper installation of the inline strainer, I started cleaning the parts for reassembly. While cleaning the oil filter housing I found a directional arrow on the top of the housing which gave the flow direction for the hydraulic system. It flows from the reservoir to...

Toro/Wheelhorse grommets worked perfect. Thanks

I removed the hydraulic strainer before realizing it had a flow arrow. Strainer is in line between reservoir and pumps, I think that the flow would be from the pumps to the reservoir, because the hydraulic filter is in the other line from the reservoir. Am I correct? Thanks for your help, WL McCabe

I appreciate your response and will follow up on the info. Thanks, WL McCabe

I appreciate your response and will follow up on the info. Thanks, WL McCabe

Is there any where the sealing grommets for the oil lines into the bottom of the reservoir can be purchased or is it necessary to replace the everything as a unit? The reservoir is in good condition, but the grommets need replacing. Thanks for anyone's help, WL McCabe