Search results

Results 1 to 50 of 500
  1. ILENGINE

    1999-2000 Tecumseh OHV 17.5hp in Huskee 42” Tractor Supply Mower

    Tecumseh is Julian Date Day 62 of 2000. Or since 2000 was leap year. Should translate to March 2,2000
  2. ILENGINE

    Chain saw advise

    Production of Poulan products was supposed to have ended in 2019-2020 model year, with the Husqvarna restructure of ending box store product sales. So I would be sceptical if Poulan and some of the Husqvarna products are not being farmed out to 3rd party licensees. I know the Husqvarna...
  3. ILENGINE

    New to me Briggs 8 hp on a Troy Horse Tiller

    The Rural KIng ones were overstock from manufacturers that purchased too many engines for their operation, and the excess was sold under the table at a discount, and the code was removed so the engine couldn't be traced back to the original OEM that purchased them..
  4. ILENGINE

    Dual gas tank - bypass valve

    Basically mandatory starting in 2012
  5. ILENGINE

    New to me Briggs 8 hp on a Troy Horse Tiller

    Yes. Where the model numbers were stamped into the blower housing it would look like somebody took a dremel tool and ground the code portion of the model, type, code.
  6. ILENGINE

    New member Intro

    Welcome to the forum. If you have any questions be sure to include model and serial information from the mower and engine so we can see specific items for your mower.
  7. ILENGINE

    New to me Briggs 8 hp on a Troy Horse Tiller

    Rural King did the same thing. They would sell engines with the code ground off, which resulted in you purchasing a new engine with no warranty.
  8. ILENGINE

    Parts source requested

    duplicate thread posted under new member https://www.lawnmowerforum.com/threads/new-member.82454/
  9. ILENGINE

    New to me Briggs 8 hp on a Troy Horse Tiller

    The only time I have seen that is when engines were acquired through non official channels. It was done to avoid the engines being traced back to their source which may of been an auction or other unapproved sale.
  10. ILENGINE

    New to me Briggs 8 hp on a Troy Horse Tiller

    Model type code plate is missing. It would of been were that clean rectangle is above the starter.
  11. ILENGINE

    New member

    https://www.amazon.com/s?k=briggs+and+stratton+gasket+set+495602&crid=1U5BXSAOHH7UJ&sprefix=495602%2Caps%2C192&ref=nb_sb_ss_p13n-expert-pd-ops-ranker_1_6 For standard rings...
  12. ILENGINE

    B&S 130207-0025-01 / Code 80033107 Carb Linkage Help

    You are missing 202,203,205 and 609 as least. https://www.partstree.com/models/130207-0025-xx-briggs-stratton-horizontal-engine/carburetor-amp-fuel-tank-assy-2/ Briggs on their older engines stop putting the trim number on the parts diagram so you will see either xx or 99 in place of 01
  13. ILENGINE

    Briggs and Stratton Generator gas cap

    Maybe https://www.amazon.com/Briggs-Stratton-319587GS-Cap-Fuel/dp/B00THQ7B46 fit 158 briggs generators. your model maybe a 030740 model series
  14. ILENGINE

    Briggs starter issues grind and locking

    Starter mounted about 1/4 inch too far away from the flywheel.
  15. ILENGINE

    Torque spec

    Right answer wrong question. He is looking for the torque spec for the bolts that mount the engine to the deck. Which would be a Toro torque not a Briggs torque
  16. ILENGINE

    Briggs and Stratton Model 44N877 Type 0003G1

    Better than the clear window caulk.
  17. ILENGINE

    Goes full throttle at start

    Make sure the throttle shaft in the carb isn't sticky which can delay throttle/governor response. Also could be a sticky governor, but not as likely.
  18. ILENGINE

    NIKKI CARBURETOR HELP

    Carb repair kit is 24 757 18-S and the accelerator pump kit is 24 757 21-S You will need both to do a complete carb rebuild. You may want to recheck your spec number That number is showing a different carb than the one you have in your post. Same carb repair kit so may not matter.
  19. ILENGINE

    Chain saw advise

    Me I prefer my Dolmar saws, but Makita had to screw that up when they stopped making gas products.
  20. ILENGINE

    Starter pinion teeth, 14 vs 16?

    Briggs references the 695708 gear which appears to be a 16 tooth plastic gear for the plastic and aluminum flywheel ring gear. The steel ring gear uses the 14 tooth metal gear. part number 593935
  21. ILENGINE

    Starter pinion teeth, 14 vs 16?

    Kohler, Briggs, Tecumseh, Kawasaki, Honda. Without engine model information we are guessing what you are working on.
  22. ILENGINE

    Need help with my 210-5 .. Can't remember if blade bolts are reversed

    Right hand discharge will have right handed thread bolts. So righty tighty, lefty loosey.
  23. ILENGINE

    Briggs and Stratton Model 44N877 Type 0003G1

    Yes, and I would look hard at the mating surface to make sure it isn't warped. The plastic intake manifolds are known to warp in both the head mounting surfaces as well as where the carb mounts. Overtightening the carb mount screws can also warp the intake.
  24. ILENGINE

    Chain saw advise

    Stihl, Husqvarna, or Echo. That is about your only 3 choices outside of off brand, no part or service available units.
  25. ILENGINE

    Oil change mess, suggestions?

    Mainly because the first part of your statement, causes the second part of your statement. When you have to remove the engine from the mower to replace the spark plugs, or removing the drain plug or oil filter dumps oil either onto the belts, or the right hydrostat and then misses the drain pan...
  26. ILENGINE

    Starter gear replacement or repair

    Because the side that faces the ring gear has a beveled tooth edge to lead into the flywheel when the starter is engaged.
  27. ILENGINE

    LT1000

    When it comes to ATV and UTV's customers will repair their toys. Cost is normally not a concern. A customer that will not repair their Z turn that needs a $2,500 engine replacement won't even blink when writing the check for $2,500 for engine repairs on the UTV.
  28. ILENGINE

    Howdy

    You got caught in the new system. The Community leaders can approve threads or in the case of spam delete the thread. Since it looks like you have been approved you should be able to post normally.
  29. ILENGINE

    Speed control assembly setup

    For better assistance it would help if we had the model and serial number of the mower from under the seat so we don't have to guess which of the various models of XT1 you have. Also the Model and spec of the Kohler/Rehlko engine from the tag on the engine is still readable..
  30. ILENGINE

    New Cam-Release on 19 hp B&S Intek

    About the only thing I find AI good for is checking for what temperature to set my pellet grill for smoking a meat I haven't done before.
  31. ILENGINE

    Briggs and Stratton Generator gas cap

    Appears engine is a 25T235-0110-G1, But being on a generator the fuel tank and cap may not be part of the engine diagrams, and instead will be part of the generator itself. Generator model number should be a tag on the inside of the generator frame next to the engine.
  32. ILENGINE

    Kohler CV 745 FI (27 hp) Muffler

    Using Star's model information the O2 sensor should be part 24 418 05-S
  33. ILENGINE

    New member here, hoping to find cub cadet answers. Just an old DIY.

    Welcome to the site. Just make sure to post the actual model and serial number from the tag under the seat. XT1 covers several different models over several different years, and can changes could of been made. MTD is not know to have updated service manuals, so that may be hard to locate if...
  34. ILENGINE

    New to 2027 Bad Boy machines

    When they start paying me my hour labor plus parts to destroy parts on purpose just to get pictures we will provide them.
  35. ILENGINE

    New member

    Welcome. Feel free to look around, and if you have a specific question about a piece of equipment be sure to include the model and serial number of both the equipment and engine if not a handheld item.
  36. ILENGINE

    New to 2027 Bad Boy machines

    I have had probably 2 dozen that have failed within 30 minutes of greasing, and 6 of those never made it out fo the shop. They failed on initial test run with new bearings or new spindles installed. Inner seal will be dome bend into the bearing on the bearing that didn't fail, and the failed...
  37. ILENGINE

    Help Identifying Unusual Throttle Linkage on Briggs & Stratton 44S977-0032-G1 (John Deere 155C Engine Replacement)

    Looks like a linkage to use that engine for fixed speed applications.
  38. ILENGINE

    New to 2027 Bad Boy machines

    On a spindle that has slip fit bearings like most cheap spindles you can believe there is no damage. Try that on a spindle that has press fit bearings. The type that requires a hydraulic press to remove and reinstall the bearings, and then put grease pressure inside of the hollow cavity. and...
  39. ILENGINE

    New to 2027 Bad Boy machines

    You are holding the center at a fixed distance apart on the shaft between the blade mount and the pulley top, while the grease is trying to push the rest of the bearing out of the hollow tube. Have you ever filled the spindle full of grease and then try to turn the pulley. If the pulley is...
  40. ILENGINE

    Generac/ Dixie Chopper carburetor bleed air jet O-rings.

    Just with a little checking of service manuals. It appears that Briggs and Kohler are both using the J1939 protocol. So a J1939 compatible OBD2 scanner should at least be able to read them.
  41. ILENGINE

    Generac/ Dixie Chopper carburetor bleed air jet O-rings.

    When you deal with OEM carb kits that are 70-110% of the cost of a new OEM carb, Carbs get replaced instead of repairs. Also then you have the sealed cross drilled passages that are on the edge of too lean and a 1/4 micron of corrosion makes what should be a smooth running engine into a...
  42. ILENGINE

    New to 2027 Bad Boy machines

    Agree. I have never taken a spindle apart to remove the seals in new bearings. I have never had a new spindle fail due to lack of grease in the bearings.. I have had more than one spindle fail due to being overpressurized due to the grease being pumped into the spindle causing side loading...
  43. ILENGINE

    Just Saying Hello

    Should be some more numbers and maybe a few letters referred to as type and code.. Those items will give us what starter, charging system in some cases, and if it has a fuel pump or not.
  44. ILENGINE

    Just Saying Hello

    Will need the actual model number information from the valve cover on the engine to provide correct information for your engine
  45. ILENGINE

    917 295350 Craftsman Rototiller Fuel Supply

    Not so much that the intake valve sticks open. More likely the valve face and seat are worn which basically, the valve clearance closes and get held open.
  46. ILENGINE

    Just bought my first lawn tractor, a used JD X320

    Welcome to the world of lawnmowers. If you need anything for your JD or other mowers be sure to give us the model and serial number from the mower tag, and not what is written on a sticker on the side of the hood.
  47. ILENGINE

    1996 B&S 15.5HP engine issue

    The truth is, in this day and age, you are better off fixing the old stuff then buying the new stuff which will fail within a few short years.
  48. ILENGINE

    1996 B&S 15.5HP engine issue

    I was thinking something like this
  49. ILENGINE

    1996 B&S 15.5HP engine issue

    Seems like I remember some of the older engines having a Intake valve stem seal that was mushroom shaped. Could that plastic piece be part of the valve stem seal.
  50. ILENGINE

    1996 B&S 15.5HP engine issue

    31R907-0007 might be a possible replacement. Your original engine is supposed to supercede to the 31A607-3026, but that engine isn't showing in the briggs distribution system. and Briggs shows the replacement engine is the same as the original 31A607-3026 engine.
Back
Top