Recent content by klein

good day my toro 62 inch zero turn mower clutch has gone bad i believe, in the past few years has been sticking (clicking but not engaging) a simple tap on it would engage it . while gutting grass for the first time this year the mower blades stopped spinning . a simple tap didn't fix it, after...

good day i'm working on a Briggs V-Twin Intek Engine, i have all the bolts out and have separated oil pan from the main housing by about 1 1/2 inches. main shaft is pulling out from the top. the oil pan turns on the crank shaft but won't pull out, i have used a block of wood and ball peen on...

according to BDP-10L (PL) Hydrostatic Pump Service and Repair Manual it stats i do know what you mean. and i do understand the risk . is there a best way to purge the pump of air ?

hi i have a toro built in 2001 so it is 17 years old mod = 74240 ser = 210000507 hydro-gear pump = bdp-10l-121p one of the pumps is leaking on my toro zmaster , i need to replace the gasket circled in red in the picture. i believe if i loosen the mount for the oil filter and move it out...

i have a toro model #74240 14 year old 62" mower that has stopped charging, with the mower running full speed i only get .778 volts from the stator. so i assume the stator is bad or the magnets have come loose if in fact that is posable on this model ? do i have to remove the engine to get to...