Search results

after calling parts tree they gave me the number kohler and after going through the auto system it gave me the address to a local dealer, so i called them and they could not tell me, so they are calling kohler and i'm on hold lol this is a mess this morning . i called parts tree they list two...

there are so many different kinds of JB weld i need to buy ? do you use the two part clear ? J-B Weld 50112 ClearWeld 5 Minute Set Epoxy Syringe

hammermech anicman i have one magnet that is broke in half, so regluing them back in might not work for me. also not all the magnets are the same seems to be 3 shorter than the other three .check links in the above post.

i have checked each lead to ground and it was zero. no reading to ground or the housing of the stator .i have never used an in packed, on this engine. only hand tools. magnets flywheel

this is the second time i have had to replace this flywheel ! the first time was in 2015 and the magnets were destroyed a lone with the stator. kohler said they were having trouble with there glue. this time the magnets just came off and were stuck to the stator . i believe it has a 25 amp...

good day my toro 62 inch zero turn mower clutch has gone bad i believe, in the past few years has been sticking (clicking but not engaging) a simple tap on it would engage it . while gutting grass for the first time this year the mower blades stopped spinning . a simple tap didn't fix it, after...

good day i'm working on a Briggs V-Twin Intek Engine, i have all the bolts out and have separated oil pan from the main housing by about 1 1/2 inches. main shaft is pulling out from the top. the oil pan turns on the crank shaft but won't pull out, i have used a block of wood and ball peen on...

according to BDP-10L (PL) Hydrostatic Pump Service and Repair Manual it stats i do know what you mean. and i do understand the risk . is there a best way to purge the pump of air ?

hi i have a toro built in 2001 so it is 17 years old mod = 74240 ser = 210000507 hydro-gear pump = bdp-10l-121p one of the pumps is leaking on my toro zmaster , i need to replace the gasket circled in red in the picture. i believe if i loosen the mount for the oil filter and move it out...

i have a toro model #74240 14 year old 62" mower that has stopped charging, with the mower running full speed i only get .778 volts from the stator. so i assume the stator is bad or the magnets have come loose if in fact that is posable on this model ? do i have to remove the engine to get to...