Ric
Lawn Pro
- Joined
- May 7, 2010
- Threads
- 142
- Messages
- 5,765
Think it was aimed at me lol. Yes it's happened a few times had a crank case split once lots of oil fell onto my gravel floor not much I can do. The biggest was that I accidentally cut a water hose on a car before I could find my fluid catcher most had spilled and sank in.
Usually lots of extra precautions are used so I don't spill very often the aquifer under me is nearly a mile below surface I think I'm good
There was nothing aimed at you personally.
If the million people were dumping in the same spot oh what a mess. Did I forget to tell you that there aren't a million people dumping in my driveway. Chain saw fuel tanks are small, might be a pint to the most. Now spills on my shop floor, a few ounces at a time and dried up with saw dust then put into the sweepings. I guess I don't understand what harm I am doing to the environment? Now if you do any amount of mechanic work I know you will get small spills from time to time, just what do you do when this happens? Like I said earlier a old junkier car going down the road spills more fluid then I do.
If the million people were dumping in the same spot oh what a mess. I agree with that and that's what's happening everyday. You pour your chain saw fuel in the drive, the guy down the road changes his oil in the car and he takes it out and pours it along his fence line to kill the grass. The next time you want to dump you chain saw do it in on your front lawn and in a couple of days ask your question what harm I am doing to the environment when your grass has died and the ground where you pour gas oil mix wont grow grass for a couple of month. Now I know accidents can happen but I also know that the greatest majority can be avoided if you think about the job you're going to do before you do it.