bwestbrook
Well-Known Member
- Joined
- Jul 23, 2011
- Threads
- 32
- Messages
- 189
Have a cub model 1515 that keeps blowing fuses while it is running. It does it at only an idle. The two red wires going to the fuse both get extremely hot within about 30 seconds. The initial problem was hard to start. It has non adjustable valves. I have 12.6 volts at the battery and battery side of solenoid. On the starter side of the solenoid I am only getting about 6-7 volts. Tried another solenoid and same thing. Cleaned all terminals no difference. Tried jumping straight to the starter still hard to turn over. What else can I check?