Latest activity

Sounds good. Appreciate the feedback. Take care and thank you.

Hi I can't get a spark. Any help please The coil resistance is reading 15 on 200k setting on multi-meter It was working fine last...

Ever had a case where all the engines were working one day then after a storm have 5 coils failures the very next day? So glad they...

Thanks for the reply & suggestion. I’ll go over it again & the belt routing.

You must of missed something in the belt routing or a pulley has fallen off.

Check blade brakes.

According to pictures I checked, this has a manual lever and cable to engage the deck operation. The spindle pullies have a blade brake...

Make sure the idler arm return spring is in place as help to engage the spindle pulleys brakes when the PTO is disengaged. Also check...

Ever had a case where all the engines were working one day then after a storm have 5 coils failures the very next day? So glad they...

Sounds like the governor spring is either wrong, or installed wrong. 4800 should be out of the range of adjustment. I'd look over the...

If you've failed to maintain the under side as i do and it's dried , mow wet grass for a couple hours to soak the dry then a water hose...

Hey you all this year has been a coil changing year and replacement coils are what I have noticed not what they used to be, I ordered...

Or a "Mr Funnel " combination funnel & filter that will also remove any free water in the fuel. Mr Funnel comes in various sizes. For...

I almost never wash my mowers/decks. I use high pressure air to remove chaff (wet & dry). Why? Simple, wet vegetative matter starts to...

Clean the underside really well and use PAM cooking spray each time after it is cleaned and dried