Latest activity

A piston stop will not screw up the piston. I use one all the time. What will screw up the piston is forgetting the stop is in the spark...

Don't buy anything from the store. Take your used motor oil and an old paint brush. Slather the underside of the deck. Park it on some...

I have a GENUINE Hoda GX200 with a GENUIUNE Keihin carburetor that I need to do a thorough cleaning on. I have B&S 19061 and 19062...

It also doesn't help when they show illustrations with diagram numbers that are not used.

I posted thhis and within 5 minutes I found what I needed at Kohler. They provided me with a download link for the complete service...

Hey guys. I had the oem mulching kit on my mower than swapped out with a Gator Single Blade mulch when my blades were worn out. Well...

According to pictures I checked, this has a manual lever and cable to engage the deck operation. The spindle pullies have a blade brake...

Someway the bolt holding the choke lever, with all the springs attached came loose on my SV730 3043. After 3 days of searching I have...

Hi bartles, Sounds like he was familiar with only one example, and he does not work on enough of these engines to know there are...

Admittedly he doesn't get too close to a tool box.

Hi bartles, Sounds like he was familiar with only one example, and he does not work on enough of these engines to know there are...

Unplug the PTO from the harness, then check to see if it will keep running. This favors a safety switch issue. The PTO clutch diode is...

According to pictures I checked, this has a manual lever and cable to engage the deck operation. The spindle pullies have a blade brake...

Check blade brakes.

Make sure the idler arm return spring is in place as help to engage the spindle pulleys brakes when the PTO is disengaged. Also check...