Latest activity

This is one of those "urge to kill" deals....as it turns out the guy told me he thought it had another spring(besides the governor...

You must of missed something in the belt routing or a pulley has fallen off.

Don't buy anything from the store. Take your used motor oil and an old paint brush. Slather the underside of the deck. Park it on some...

Yes i see that

Thanks Doc. I am hoping to find something that may last for a while not sure if it is a product out there that will do that. I am not...

Had the similar problem on my S110 rear wheel. Did the soap bubble trick & even submerged it in a metal wash tub. No apparent leak. Put...

Time to either buy a new tire or put Slime in the tire you have. Slime is high viscosity and will seep very slowly through wherever your...

Last resort...Find a tub big enough to completely submerge the tire and rim assembly. Then fill the tub completely with water. This will...

The old belt broke & replaced it with the exact one from JD. When the blades are disengaged & you shut the engine off the blade pulleys...

The only spring for your throttle is the 209B. Your model-type-trim doesn't use a secondary spring like some other versions of engine...

I realize this is not an application discussed in a lawnmower forum, but I need some parts locator assistance: The B&S engine powers an...

Have a troy bilt pony 12 yrs.old with 17.5 briggs.Last I used it seemed to lose power.Shut it down and would not start untill about 3...

I've a problem with the engine dying when I engage the PTO, I tested the PTO and it's good but there's a diode In the wiring harness to...

I just replaced one of those. The first aftermarket one didn't tighten down properly and the belt didn't line up. The complete end of it...

Briggs 100602-121-B1 engine with 4800 rpms. How to adjust the rpms down to 3100 range. All the carb linkages move smoothly. Thank you...