Latest activity

I don't know the specifics on yours, but can't you take a long socket extension (for example) and put it through the hole on one bearing...

Did this problem just start happening, or has it always done this? -- If it has always done this, it could be a bad deck where one of...

I unplugged the fuel shutoff solenoid and it’s running better than its ever run. I know that’s only a temporary fix. The more I think...

Whack a chinese motor on it

Neither are very good running parallel to the slope. That's why manufacturers put recommendations in their owners manual.

I am with the upside-down blade or a loose blade

You can lookup parts at the CubCadet website. You'll have to click through the decision tree menu using your model number, ZT1 50. It...

Check the wiring diagrams. You will need the model number and serial number to find them.

Looking for some guidance on how to disassemble this MTD spindle from a Dewalt Z254 (similar to CubCadet ZTX4 54). Part number in the...

Yeah I will try to charge the battery tomorrow. PTO switch is not on. I made sure. Fuse is not blown. I checked I don't think it's a...

I have One of those portable jump starters. I tried it and it didn't crank. But I guess I didn't leave it on there long enough. I'm...

Dead battery. PTO switch is on. Faulty safety switch. Blown fuse. Bad ground.

I would start with checking the battery and/or charging it. If it didn't crank by jumping the starter solenoid I would be leaning...

Dead battery. PTO switch is on. Faulty safety switch. Blown fuse. Bad ground.

Yep, the diode is shorted (failed) internally, the PNP material has failed and not resistant in only one direction. The multimeter tests...