Latest activity

Is this what you mean?

I would start with checking the battery and/or charging it. If it didn't crank by jumping the starter solenoid I would be leaning...

Hey Fellas- My 54 inch Bad Boy MZ Magnum zero turn riding mower quit on me. It's model BMG5425KO. I turn the key and it just clicks...

Hello Friends- I am in need of help!! My zero turn Ariens Ikon XD 52 won't start! It was working fine last weekend when I cut my lawn...

Bottom valve is intake top is exhaust. Clearance is .003 to .005 on intake and .005 to .007 exhaust.

I need make and model of your mower. A pic would also be nice. Maybe I can help you.

Bottom valve is intake top is exhaust. Clearance is .003 to .005 on intake and .005 to .007 exhaust.

What model mower is it and model type and code of engine.

I recommend you check all of the rest of the wiring carefully because it is very unusual for a PTO clutch to fail this soon. Commercial...

What should I set the top .004? What should I set the bottom .006?

Cut a couple of passes and determine if it off, then adjust a little at time. No need to make a major project out of it.

Teryl Fixes All has some good videos, you just have to overlook his cooky skits and the way he appears. He is a small engine master.

Thank you! I touched the tips, and the reading wound down to 000 after starting at .004 ish. The factory wiring I can see appears to...

I’ve wasted hours attempting to adjust the valve on TDC. Next plan is to attempt this method. Pres down one valve spring then adjust...

Did you touch the meter lead tips together and verify the meter and leads are actually good? Usually, the leads will read .001 or .002...