Latest activity
-
ILENGINE replied to the thread Craftsman Deck Belt Routing.I think the steering rod to the front wheel is installed backwards. from the parts diagram needs flipped 180. -
Yyinmeout replied to the thread 28607 possible ignition issue - not really sure..Ok, thanks for the answer.
-
AAuto Doc's posted the thread Wiring diagram for an early serial number JD 757 Z-track in Small Engine & Mower Repair.I need a legible diagram for JD 757 Z-track I have been "unrigging" for a customer lately. Last 6 number of the PIN tag 022013 which...
-
DHi, I have an old Craftsman 11hp riding mower with a 36 inch deck. Model number 917.254274. I picked it up for free and fixed it all...
-
-
ILENGINE replied to the thread intek 12.5 hp engine cylinder head gasket need to confirm part #.I didn't include a part number for the OHV valve gasket set because in most cases the only thing you will use will be the head gasket...
-
Ssteves snapper replied to the thread intek 12.5 hp engine cylinder head gasket need to confirm part #.https://www.amazon.com/gp/product/B0DLVGBKGC/ref=ewc_pr_img_1?smid=A3QEAIM7YYCNN4&psc=1...
-
Ssteves snapper replied to the thread intek 12.5 hp engine cylinder head gasket need to confirm part #.thanks for tip
-
ILENGINE replied to the thread intek 12.5 hp engine cylinder head gasket need to confirm part #.273280S is the head gasket...
-
AAuto Doc's replied to the thread intek 12.5 hp engine cylinder head gasket need to confirm part #.Go to Google, then Part Tree or Pro Parts Direct and look up Briggs and Stratton using the numbers stamped into the valve cover.
-
Mmotomike replied to the thread HRR216VKA Height Adjuster.Success! Used steel wool and brass toothbrush to clean the corrosion off the axle. Put some heat on t he adjuster and was finally able t...
-
Mmmahoney626 replied to the thread Repair or replace lawn tractor because the desk has rusted through? (John Deere LA145).I was curious as to what other people did in the same situation.
-
Mmmahoney626 replied to the thread Repair or replace lawn tractor because the desk has rusted through? (John Deere LA145).Southeast Louisiana, not that I'm aware of that would be able to assist in this particular manner, but I haven't really checked in depth...
-
Mmmahoney626 reacted to Auto Doc's's post in the thread Repair or replace lawn tractor because the desk has rusted through? (John Deere LA145) with
Like.
Where are you located? Are there any mower repair shops or salvage operations in your area. Finding a good deck for one this age might... -
Mmmahoney626 reacted to SeniorCitizen's post in the thread Repair or replace lawn tractor because the desk has rusted through? (John Deere LA145) with Like.
If it still mows grass keep searching for a pre-owned deck while using the one you have . A thought : let it be known at a few mower...
-
Mmmahoney626 reacted to ILENGINE's post in the thread Repair or replace lawn tractor because the desk has rusted through? (John Deere LA145) with Like.
I think you are at a crossroads. The powder coat has done what it does. Peel off in sheets. The replacement cost of the deck will...
