Latest activity

intek 12.5 hp engine cylinder head gasket need to confirm part # here’s the engine I have image I believe I need a new cylinder head...

Thanks! Yes, it has a single 20A fuse mounted on the tiger eye console between the seat and the console. That circuit breaker will be a...

Sounds like you are on the right track, debris gets in and then rust accumulates. Keep soaking and working it good.

Hey thanks for the help everyone (sic). I found the issue and fixed it. If anyone is interested, I will post the solution but it seems...

I suggest you check Parts Tree for a replacement coil. You will need the rest of your numbers stamped on the starter cover.

Where are you located? Are there any mower repair shops or salvage operations in your area. Finding a good deck for one this age might...

Why? The shaft adapter has a double flat ground on it. The problem is it is a odd size tool wise. It is 29/32" open end wrench size...

An 18V 1/2-inch drive Ryobi impact with correct socket will know the nut off quickly. Then it is a matter of getting the pulley off if...

Got it off. Pics attached. This one is drivers side (LH when sitting and mowing) Didn't have to remove the wheel. Working...

If it still mows grass keep searching for a pre-owned deck while using the one you have . A thought : let it be known at a few mower...

I think you are at a crossroads. The powder coat has done what it does. Peel off in sheets. The replacement cost of the deck will...

I'm working on disassembling the wheel and adjuster. Hoping that cleaning everything up good will take care of the problem. I'm down to...

I have a John Deere LA145 that I purchased from a neighbor before they moved, used but extremely low hours and in like new condition, in...

Mulching blades are not designed to have lift. Most mowers other than Snapper's have no lift with lift blades on.

The 2 things may not be related. I have seen the seals on the Command series engines just get loose and fall out. Usually happens...