ZTR w/ Bagger that actually works well?

[KennyV]

Hey Nemoi....
Where in Kansas are you located??
If you are close enough to the Wichita area ... I may have exactly what you need... :smile:KennyV

 

[txzrider]

you need to look at the cyclone rake! I pull one with my snapper zrider and it works well, unless your on a steep slope. Then your subject to the traction of the zrider which is always questionable on a hill anyway.
Cyclone Rake Lawn Vacuum Systems

 

[Mad Mackie]

Not all belt driven hydrostatic lawn tractors will pull a vac of this type, too much belt slippage. Neighbor has a 26HP/42" deck Craftsman rider and it can't handle his powered/electric start DR vac on casters, he now has an 18 HP diesel Kubota and the Craftsman takes up room in his garage.
Mad Mackie in CT

 

[SkipD]

I have a 2014 Craftsman Z6000 42" model 247.204110. I installed a Troy-Bilt RZT 6.5-Bushel Twin Bagger for 42-in to 46-in Zero Turn Mower. This mower will pickup anything and everything! I use mulching blades which makes the pieces a little smaller so I think it carries more.