vangreenacres
Forum Newbie
- Joined
- Jul 14, 2019
- Threads
- 1
- Messages
- 7
Hi,
Have had a Husqvarna Z4822 zero-turn for 7 years and got the bright idea to hoist it up vertically (as in standing on the two rear wheels) from the front to remove and sharpen blades and clean under the deck. Took about 45 minutes. Set it back down and the engine began to turn over then stopped as if the battery was weak. Charged the battery and got much the same reaction. Any ideas what I may have done to cause this and how to fix the problem? Any help would be appreciated. Oh, and I noticed the crankcase oil reads zip.
Have had a Husqvarna Z4822 zero-turn for 7 years and got the bright idea to hoist it up vertically (as in standing on the two rear wheels) from the front to remove and sharpen blades and clean under the deck. Took about 45 minutes. Set it back down and the engine began to turn over then stopped as if the battery was weak. Charged the battery and got much the same reaction. Any ideas what I may have done to cause this and how to fix the problem? Any help would be appreciated. Oh, and I noticed the crankcase oil reads zip.