Retiredcarguy
Well-Known Member
Hello, Is there any experience out there on replacing a X575 fuel pump. The removal of the rear fender and attached fuel tank seems to be a challenge. Thank you JD owners!
X575 Fuel Pump
- Thread starter Retiredcarguy
- Start date
mechanic mark
Lawn Pro
How to Install the Fuel Pump on a John Deere X575 | eHow
OMM148365_E2 Information for your JD x575. Scroll down left side of screen.
OMM148365_E2 Information for your JD x575. Scroll down left side of screen.
Last edited:
Retiredcarguy
Well-Known Member
Thanks guys. It all worked out very well yesterday after just a few hours of tractor fun.
The fuel pump and sender assembly is automotive style. After removing left and right fender bolts, tank support, seat and mount, 4WD lever knob and a few harness connections it came off relatively easily. The pump R&R was also easy. See the photo.
The fuel pump and sender assembly is automotive style. After removing left and right fender bolts, tank support, seat and mount, 4WD lever knob and a few harness connections it came off relatively easily. The pump R&R was also easy. See the photo.
Last edited:
I would like to get in touch with you as I think I am having the same problem. with my 575x. JD replaced it once before and it seems to be repeating it again. It seems like some dirt or debris e collects on the bottom and clogs the filter. After a few minutes it can be restarted until it stops again. This time I had to choke it to get it going for a few seconds to get it running so I could just get it into the garage! I would like to try to fix it myself as $$cost is so high from JD dealer. If I could contact you (or someone) who did this it would be great. I am not sure how to get the shifter knob off - thinking it is screwed on?? Any help would be appreciated.
I would like to get in touch with you as I think I am having the same problem. with my 575x. JD replaced it once before and it seems to be repeating it again. It seems like some dirt or debris e collects on the bottom and clogs the filter. After a few minutes it can be restarted until it stops again. This time I had to choke it to get it going for a few seconds to get it running so I could just get it into the garage! I would like to try to fix it myself as $$cost is so high from JD dealer. If I could contact you (or someone) who did this it would be great. I am not sure how to get the shifter knob off - thinking it is screwed on?? Any help would be appreciated. I have sent this message to another person as well for help.