Wire Connections for SS 4225

Thanks for the wiring diagram Rivets.

The wires are one white and one tan. The tan could be a light brown. They were both in the plastic coil wrap so they must have similar lengths.
 
That is the wrong diagram. Must be for a different model. I’m unable to locate a diagram for model 74721. Can you take a pic of the chewed wires by the battery? I’ll keep looking.
 
The first post shows the pic from a link due to file size limits. This link shows the coil wrap stripped. I laid the wires near a black and brown wire socket on another coil. I doubt that they go there as the colors don't match.

After I posted this I saw your two previous posts. Those locations makes sense from how it was acting before it stopped working, thanks! I will post back tomorrow with success hopefully...

Microsoft OneDrive

1drv.ms 1drv.ms
 
I messed with the brake actuator but the plug of wires at the connection looked ok. Some youtube videos helped me see how to manually disengage the electronic brakes so that I could move the mower.

I found the problem. The two wires cut are just below the left hand steering handle near the switch. The stub is so short that I may have to replace it. Thanks for your multiple replies which helped!

The other end to splice has maybe 2 inches clear so splicing those two ends is doable.
 
Last edited:
Is there enough there to solder to. I’ve soldered a short splice in first, then attached it to the remaining wire.
 
You must log in or register to reply here.
Back
Top