where does the yellow wire go
- Thread starter Jammer48
- Start date
bertsmobile1
Lawn Royalty
IF the mower is running fine then don't worry about it.
The wiring harnesses are universal made to fit every engine that could have been fitted and all options.
As such you end up with the odd orphaned wire for things like hour meters , oil lights , alternator warning lights etc .
IF the mower is not working properly then tell us what it is not doing which will point to where the wire might need to go .
The wiring harnesses are universal made to fit every engine that could have been fitted and all options.
As such you end up with the odd orphaned wire for things like hour meters , oil lights , alternator warning lights etc .
IF the mower is not working properly then tell us what it is not doing which will point to where the wire might need to go .
What kind of connector does it have on it?
post a picture if you can.
post a picture if you can.
![IMG_0047[1].JPG](/data/attachments/46/46845-881c23e4f4d54b2aff7f2d880a23ff2e.jpg?hash=iBwj5PTVSy)
have you checked for power on it?
Richard Milhous
Well-Known Member
I dunno crap but I'd think "headlights". The resistance of a headlight bulb is low enough to show continuity with ground, and a ground wire wouldn't be yellow. I friggin' hope not anyway.
Thank you for your reply the lights already have a dedicated connector and work as they should
no i will do that now hang on....no power with key off or on at any level of the switch... I did check for continuity and it is a ground cable apparently