wacker concrete cut off saw

[dwelder]

I have a wacker concrete saw that was running one day and died. I put new spark plug, cleaned carb, cleaned magneto, and even tried starting fluid and it won't start. It's 2 stroke also. Do you think the coil is bad or what. Need help.

 

[KennyV]

If it won't start or try to start with starting fluid...
You likely have an ignition problem, you need to start by looking for spark...
Could be the magneto coil or a kill switch/wire... or a couple other things, check for any spark first. :smile:KennyV

 

[Edwards saw service]

If it won't start or try to start with starting fluid...
You likely have an ignition problem, you need to start by looking for spark...
Could be the magneto coil or a kill switch/wire... or a couple other things, check for any spark first. :smile:KennyV

I agree with Kenny. Also pop the muffler off and inspect the piston and cylinder, It may be scored and therefore compression is lost. Which is not starting is a symptom of.

Edwards Saw Service in Glen Mills PA

 

[Shackelchevy77]

i recomend to anybody to buy a $5 spark tester from harbor fright or local store its a powerfull tool when used right