Ventrac Forum Opened!

We have a ventrac 4200 VXD. It seems to have a problem moving have check the hydro oil nothing is leaking . Nothing seems bent but it doesn't want to move any ideas ?
 
glor41 said:
We have a ventrac 4200 VXD. It seems to have a problem moving have check the hydro oil nothing is leaking . Nothing seems bent but it doesn't want to move any ideas ?
Click to expand...

Good evening glor41. Did you take it out of park? :laughing: Just kidding. Sorry to hear that you are having problems :thumbdown: Would you be able to pm me your serial # (right side about where your right knee would be when sitting on the seat)? If you don't know your serial # or can't go out to your tractor and check, you could pm me your name, location and dealer you purchased from and I can probably dig a little to find what you have. I have some ideas but I will check with service in the morning and see what they have to say. I'm not the service expert so I don't want to lead you astray :biggrin:
 
I think we need more information about what is happening. Have you checked out the physical linkage from the Control Selector / Park Brake lever and the SDLA forward reverse levers.

I beleive it is more likely that a cotter pin or something else is loose than any mechanical problem.

I could be wrong, but that is where I would start looking.

I've had mine for nearly 7 years and no mechanical problems.

Keep us informed !
 
Ventrac said:
Good evening glor41. Did you take it out of park? :laughing: Just kidding. Sorry to hear that you are having problems :thumbdown: Would you be able to pm me your serial # (right side about where your right knee would be when sitting on the seat)? If you don't know your serial # or can't go out to your tractor and check, you could pm me your name, location and dealer you purchased from and I can probably dig a little to find what you have. I have some ideas but I will check with service in the morning and see what they have to say. I'm not the service expert so I don't want to lead you astray :biggrin:
Click to expand...

yes I have it here.... serial is VEB2788 . move a little but not much
 
Ok here is the serial # VEB 2788 My son has talked to the dealer we got it from and he htought something was bent. we've looked all over and have found nothing son mowed with it everything was fine than all the sudden it didn't want to move. Got it in 6/16/2007 still like new only 200 something hours on it Thanks:smile:
 
Hi I Just found this site from My customer (glor51) mentioning it. Found the Issue with this tractor the neutral bypass valve in the head of the hyd pump loosened up and was letting the Hyd Fluid Bypass the drive Circut.


Scott
 
You must log in or register to reply here.
Back
Top