Valve lash verification

[Blood-root]

I need verification on a brigs 128602-0304E1. 031016F6. OHV

I’m placing it as a 12000 series. OVH vertical shaft with intake .004-.006 and exhaust.004-.006

http://www4.briggsandstratton.com/miscpdfs/RNT/Engine Specifications Chart_ms3992.pdf

Can anybody confirm this?
Thanks

 

[ILENGINE]

Briggs dealer site by exact model and type shows .004-008 for both valves.

 

[Blood-root]

Briggs dealer site by exact model and type shows .004-008 for both valves.

Ok thanks. I’ll stick with .006 on both. Much appreciated

 

[Blood-root]

I found what you are referring to. I’ve been there looking but couldn’t find it before. I wasn’t putting in the (E1).