I was 'gifted' an old edger. Made by a company called Trim Rite from Weatherford TX. It is a 1993 model 3.5 HP. I have it running but would like to install a new blade. I am trying to verify the lengthof the blade as well as the diameter of the hole in the blade. The diameter of the shaft where the blade would mount is 3/8ths. of an inch. It looks like there is room for a 10 inch blade. I thought I saw a reference to a 10x 2 with a half inch center hole. As being the right size of blade so I don't know if I.am missing some kind of a sleeve or bushing/ mounting washers to make a 1/2 inch hole blade fit a 3/8ths shaft and stay in place and not slip. Does anyone have any info on this edger?
Thanks
CF
'
Thanks
CF
'