Got a 1995 42" Craftsman with a 14HP Kohler. Been trying to keep up with maintenance over the years but I recently let it go. I'm back at it again but I believe I have an issue with the transaxle. When the rear tires are off the ground, no matter what position the gear selector is in, the wheels spin in opposite directions. I believe that's fine but the pulley sitting above the transaxle does not turn in relationship to the wheels. It does turn when I turn it but not when the wheels are being spun and again, doesn't matter what gear I've selected. I checked the shaft going into the transaxle that is connected to the shift rod and it appears to be tight and properly moving the shaft into the transaxle. It's weird because when I parked it, the transaxle was fine. Anyone want to take a shot at the problem?