Stihl trimmer trouble starting

LoCo86 said:
Had the same problem with my FS130. I put a new spark plug in and it fired right up but then went back to having to use about 15 pulls to get it going. I put a new carb on it after 10 plus years of use and it fires up every time now within 2-3 pulls. But since yours is a newer model maybe you just need to clean out the carb and lines and put some new fuel in it and see how that works. All this is stuff you can do for free, as Ric says, so try all of that before going to your dealer. Like I stated before it sounds like a fuel system issue you just have to find out which part is the trouble.
Click to expand...


Can I ask if your using the primer bulb and priming the unit before you try to start it?
 
LoCo86 said:
I only use the primer bulb if the unit runs out of fuel. Other than that I just choke it and it starts right up.
Click to expand...

The secret with starting a Sthl of any type trimmer, blower or edger is never using the primer. Nine times out of ten using the primer floods the unit. Just use the choke and it will fire in a couple of pulls then turn the choke off and crank it again and it starts right up. Every piece of stihl equipment I own starts the same way.
 
Ric said:
The secret with starting a Sthl of any type trimmer, blower or edger is never using the primer. Nine times out of ten using the primer floods the unit. Just use the choke and it will fire in a couple of pulls then turn the choke off and crank it again and it starts right up. Every piece of stihl equipment I own starts the same way.
Click to expand...

Yea I found this out the hard way when I first started using Stihl commercial equipment. But to my defense I was 16 and just a novice to this industry.
 
LoCo86 said:
Yea I found this out the hard way when I first started using Stihl commercial equipment. But to my defense I was 16 and just a novice to this industry.
Click to expand...

Don't feel like a lone stranger because there are alot of people or users that don't realize it.
 
Yes, I use the primer bulb for each use. I need to put some fresh fuel in it and look at the carb. I guess I'll buy a new spark plug on the way home. It's very frustrating, especially now at the start of the growing season. I have learned my lesson though. Thanks for all of your input and advice.
 
Bomba said:
Yes, I use the primer bulb for each use. I need to put some fresh fuel in it and look at the carb. I guess I'll buy a new spark plug on the way home. It's very frustrating, especially now at the start of the growing season. I have learned my lesson though. Thanks for all of your input and advice.
Click to expand...

Yea just do it tonight. You should be able to check and fix anything that's wrong in under an hour.
 
You must log in or register to reply here.
Back
Top