Steering column

[FNelson]

Husqvarna GT48xls. After replacing rims (they keep getting scored in a circle till they break entirely). Even after replacing new rims with bearings, Front wheels keep flying off. I replaced both spindles November, 2019, at 180 hours. The machine is now at 465 hours. Also could this be related to worn steering parts? There is almost 1/2” play in the steering wheel. Don’t know why.

 

[StarTech]

Most likely you are missing washers, This allows the rims to rub. Also you must be using the stronger clips.

If you are using clips like these (E clips):

They need to changed to these (Poodle Rings):

The old style would simply not hold as well and easily installed loose.