Snapper YT-16 no power electric

[digitaldust]

Snapper YT-16 no power electric

HI i was mowing when my deck stopped . I drove back to my yard to work on what just happend as the deck would not restart with the switch, the switch tested ok , and the clutch all is well, however not i turn the key and nothing no a click the battery is 13 volts and ok
does anyone have a schematic for this ,

the safety system is all testing ok as switches go . turn the key and nothing .

thanks for the help

 

[Mikel1]

Page 20 of Snapper YARD TRACTORS & MOWER ATTACHMENTS Parts Manual | ManualsOnline.com

I would check the circuit breaker first.

 

[digitaldust]

If I tested the breaker right its good I pass tone through iton dmm. Clutch switch seems sketchy but
I hooked the whites together and still no power . I tested the key it seems to switch and pass signal. The pto sw seems unknown as I dont have a pin out for this stuff. Also there is a round item next to the solenoid. Unknown item as well the wiring at the back on the solenoid.

 

[Mikel1]

So you have 12+V to the ignition switch? If so when trying to normally start is there any voltage on the blue wire to the solenoid?

 

[digitaldust]

Hi everyone ! well turns out with the help of ya all . I got it. It was the power to the back of the solenoid. It was very dirty.

 

[Mikel1]

Glad you got it:thumbsup: